Instructions

I-5-6-3 Reset

You can reset your smart plug back to its factory default settings. This will

reset all settings including scheduling, email notifications and time settings.

Click “Reset to Default” from the “Plug Settings” menu and confirm that you

wish to reset. The smart plug will take a couple of minutes to reset before it is

ready for use again. The smart plug is ready for setup when the network LED

is flashing slowly in red to indicate installation mode.

You can also reset the smart plug by pressing and

holding the hardware reset button. Release the

button (after ~10 seconds) when the network LED

is flashing quickly in red. The reset button can be

found on the front panel of your smart plug.

Please refer to I-1-5 Reset.