Instructions

14
A message will be shown indicating that it is
connecting to the smart plug.
Firmware Upgrade
When the EdiSmart app is connecting to the smart plug, the app will identify
the current firmware version of your smart plug and prompt you to upgrade
it to the newest firmware version if available.
Tap “Yes” to upgrade your firmware.
After firmware upgrade, please press and hold the Reset Button (for ~10
seconds) on the Smart Plug until the network LED starts flashing quickly in
red and go back to Step 1 to continue setup.
If you have decided to integrate your smart plug to the EdiSmart app,
other apps (e.g. EdiLife) will not be able to control the smart plug.