Instructions

I-2-1-2 Connecting the Smart Plug

For EdiSmart app to control the Smart Plug, it must be connected to a Wi-Fi

network with internet connectivity. To do so, follow the steps below:

If you have not reset your smart plug, please do that now! Press and hold the

Reset Button (for ~10 seconds) until the network LED starts flashing quickly in

red and let go.

Please bring the smart plug within the Wi-Fi range of a

Wi-Fi router that has internet connectivity.

1. On your iOS device, go to Settings.

2. Tap the “Wi-Fi” (outlined in red) option.

3. Find and connect to the smart plug by tapping the

smart plug’s Wi-Fi name.

The smart plug’s Wi-Fi name should be in the

format EdiPlug.Setup XX as shown on the left:

When connected, the blue tick should be

shown.

If you cannot find your smart plug, try resetting it.

See I-1-5 Reset.