User`s manual

130
9.3 Get Setting Values get Command
get command is used to get the setting values of this
print server. The format of get command is as following:
get argument
Then the argument value will be displayed after the
command. For example, if I want to get IP address of the
print server, I type get ip command and the IP value
IP_ADDR=192.168.2.2’” is displayed:
admin# get ip
IP_ADDR=192.168.2.2
If you enter get only, the system will list all
available arguments of get command.
The following table lists all the arguments whose value
can be got by get command:
Argument Description Example
psname
Print server name admin# get psname
PORT1_PS=PS254896
password
Login password admin# get password
USER_PASSWORD=1234
username
Login username admin# get username
USER_NAME=admin
wlfunc
Wireless LAN function is
enabled or disabled
0: disabled
1: enabled
2: auto
admin# get wlfunc
WIRELESS_FUNCTION=2
wlmode
Wireless LAN mode is
Infrastructure or Ad Hoc
0: Infrastructure
1: Ad Hoc
admin# get wlmode
AP_MODE=1
ESSID
ESSID of the wireless LAN
admin# get ESSID
SSID=default