Quick Installation Guide

4.2. Administration Utilities Installation

**Please find the utility manually from CD-ROM drive’s root directory or

download it from Edimax webiste. If you have any question please check with

Edimax local technical support team.

The Administrator Installation Program executes a wizard-driven procedure

that performs the following tasks:

z Install all necessary utilities and drivers in your PC (including the

client utilities).

z Prompt to configure the print server (including the print server name

and IP Address).

z Add the network port of the print server to your PC.

After the installation, perform the standard “Add Printer” procedure and

choose the print server’s “Network Port” in the “Available Ports” list. Then, you

can test printing function from the Administrator PC.

The Administrator Installation can be performed on Windows

2000/XP/2003/Vista with the same user interface. Before the installation,

please verify that your network protocol is installed on your PC (TCP/IP, IPX

and/or NetBEUI). Note that the following steps are running in Windows XP, for

other Operation Systems the procedures are similar.

1. Please execute the Administrator installation software manually.