Installation guide

12
17. Choose if you want to run the “MFP Manager” utility automatically when
Windows starts. It is recommended to enable the setting.
18. The default wireless setting is “Auto”. The MFP Server will detect if the
MFP Server is connected to a wired LAN network through the attached
Ethernet cable. If yes, it will work in wired network. To enable the wireless
setting, please remove the Ethernet cable. For more detailed information
about wireless setting, please refer to Section 7.8 in the manual.
3.3 Windows “Add a printer”
This should be performed on all machines in the network in order for any of
them to print.
1. Click on Start > Control Panel > Printers and Faxes, and choose “Add a
new printer”. The add printer wizard should pop up.