Installation guide

9
If you do not want to set it now, please click “Cancel” to finish the
installation. You can then use the “Server Manager” utility to configure the
MFP Server IP address.
13. The “Wireless Network Settings” screen allows you to connect your
wireless MFP Server to your wireless router, access point, or point-to-point
ad-hoc connection.
The MFP Server will automatically scan wireless networks nearby. Please
select the appropriate wireless network that you would like to connect
from the list and click “Next”.
You may choose to scan for the wireless access point or router
(Infrastructure mode) or the wireless adapters (Ad Hoc mode). Or, you
can manually enter the wireless network information (Manual mode). By
default, the wireless settings are as below.
Mode: Ad Hoc
SSID: Default
Channel: 11