User Manual

3
I-4. LED Status
LED Behavior
Power
Green
The access point is on.
Off
The access point is off.
LAN
Green
LAN port is connected.
Flashing
Activity (transferring and receiving)
Off
LAN port is unconnected.
Wireless
Green
Wireless enabled.
Flashing
Activity (transferring and receiving)
Off
Wireless disabled.
I-5. Reset
If you experience problems with your access point, you can reset the device
back to its factory settings. This resets all settings back to default.
1. Press and hold the reset button on the access point for at least 10
seconds. Then release the button.
You may need to use a pencil or similar sharp object to push the
reset button.
2. Wait for the access point to restart. The access point is ready for setup
when the LED is green.