Quick Installation Guide

require. Then enter a new SSID in the corresponding numbered

fields below, before clicking “Apply”.

4. To configure the security of your access point’s 2.4GHz wireless

network(s), go to “Wireless Settings” > “2.4GHz 11bgn” > “Security”.

Select an “Authentication Method” and enter a “Pre-shared Key” or

“Encryption Key” depending on your choice, then click “Apply”.

If using multiple SSIDs, specify which SSID to configure using the

“SSID” drop down menu.

5. Go to “Wireless Settings” > “5GHz 11ac 11an” and repeat steps 3 & 4 for

the access point’s 5GHz wireless network.