Quick Installation Guide

I-5. Reset

If you experience problems with your access point, you can reset the device

back to its factory settings. This resets all settings back to default.

1. Press and hold the reset button on the access point for at least 10

seconds. Then release the button.

You may need to use a pencil or similar sharp object to push the

reset button.

2. Wait for the access point to restart. The access point is ready for setup

when the LED is green.

I-6. Mounting

The access point includes a mount for wall or pole which requires some

assembly.

1. Attach the mount to the back of the access point using the twelve

included M6 screws and four washers, as shown below.

Ensure your access point is securely attached to the wall mount

bracket.

1.Vertical

2.Horizontal