COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
PACKAGE CONTENTS Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): Network video recorder (1 pcs) Power adapter (1 pcs) Power cord (1 pcs) CD with utility software and user manual (1 pcs) Quick installation guide (1 pcs) HARDWARE INSTALLATION Step 1: Press the black tab on the hard drive enclosure. Step 2: Pull the lever downward to release the enclosure. Step 3: Pull out the hard drive enclosure.
Step 4: Remove the bracket in the hard drive enclosure as instructed by the arrows. Step 5: Put a 3.5” SATA hard drive in the enclosure. The hard drive’s SATA connector should be located on the left. Step 6: Use screws and a screwdriver to fasten the hard drive to the enclosure. Step 7: Push the hard drive enclosure back into the NVR. The lever should remain open during the process.
Step 8: Push the lever until you hear a click to lock the enclosure into place. Step 9: Connect the power cord to the power adapter. Step 10: Connect the power cord to an electric outlet and insert the adapter’s power plug into the NVR’s power socket. Step 11: Connect this NVR to a router or switch’s LAN port via an Ethernet cable.
Step 12: Power the NVR on. The “POWER” LED on the front panel should light up. If not, check steps 7 to 9 to ensure the power adapter is properly connected. Warning: Do not pull the hard drive out when the NVR is powered on, or data stored on the hard drive will be damaged. ACCESSING THE NVR Step 1: Install the “IP Finder” software in the CD and execute the application.
Step 4: Log in the NVR. The default username is “admin” and the default password is “1234”. Step 5: The browser might ask you to install the ActiveX plug-in. Allow the browser to install the plug-in when prompted or you will not be able to see the videos in the NVR.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: French: Czechian: Polish: Romanian: Russian: Magyar: Türkçe: Ukrainian: Slovakian: German: Spanish: Italian: Dutch: Portugese: Norwegian: Swedish: Danish: Finnish: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, 2009/125/EC.
Declaration of Conformity We, Edimax Technology Co., LTD., declare under our sole responsibility, that the equipment described below complies with the requirements of the European EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. Equipment: 2-Bay 4-Channel Network Video Recorder Model No.: NVR-4 Report No.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
13
