User manual

Parameter Description
Enable Static Routing Static Routing function is default disabled. You
have to enable the Static Routing function before
your routing rules take effect.
Destination LAN IP The network address of destination LAN.
Subnet Mask The subnet mask of destination LAN.
Default Gateway The next stop gateway of the path toward the
destination LAN. This is the IP of the neighbor
router that this router should communicate with on
the path to the destination LAN.
Hop Count The number of hops (routers) to pass through to
reach the destination LAN.
Interface The interface that go to the next hop (router).
Add a Rule Fill in the "Destination LAN IP", "Subnet Mask”,
“Default Gateway”, "Hop Count" and "Interface" of
the rule to be added and then click "Add". Then this
60