User manual

1.3 PPPoE

Your ISP requires you to use a Point-to-Point Protocol over

Ethernet (PPPoE) connection.

1.4 PPTP

Your ISP requires you to use a Point-to-Point Tunneling Protocol

(PPTP) connection.

1.5 L2TP Your ISP requires you to use a Layer Two Tunneling Protocol

(PPTP) connection.

1.6 Telstra Big Pond This Protocol only used for Australia’s ISP

connection.

Click on one of the WAN type and then proceed to the manual’s relevant sub-section (1.1, 1.2,

1.3, 1.4, 1.5 or 1.6). Click on Back to return to the previous screen.

1.1 Cable Modem

Choose Cable Modem if ISP will automatically give you an IP address. Some ISP’s may also

require that you fill in additional information such as Host Name and MAC address (see screen

below).

Note: The Host Name and MAC address section is optional and you can skip this section if your

ISP does not require these settings for you to connect to the Internet.