User manual

5. Connect the MA-
2000 to your TV or
by using an optical digital audio (S / PDIF) cable
Note:
You can skip this step if yo
audio port.
6. Press the
button on the front panel of the MA
LED would be lighted in blue.
MA-2000 on.
7.
Please check the stat
MA-2000. If it is not
light
status of electrical power outlet, or refer to
possible solutions.
8.
After choosing the desired video and audio connection, you need to select
appropriate video input mode
OUT
button on the remote control
output.
20
2000 to your TV or
display which has an optical audio port
by using an optical digital audio (S / PDIF) cable
.
You can skip this step if yo
ur TV or display does
n’t have
button on the front panel of the MA
-
2000, and the Power
LED would be lighted in blue.
Or press POWER
button to turn the
Please check the stat
us of the ‘Power’ LED located on
the front of the
light
ed in blue
, please check all connections and the
status of electrical power outlet, or refer to
Chapter 3
Troubleshooting
After choosing the desired video and audio connection, you need to select
appropriate video input mode
for your TV or display by
pressing the VIDEO
button on the remote control
to switch to the corresponding video
display which has an optical audio port
n’t have
an optical
2000, and the Power
button to turn the
the front of the
, please check all connections and the
Troubleshooting
for
After choosing the desired video and audio connection, you need to select
pressing the VIDEO
to switch to the corresponding video