Datasheet

Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice.
Copyright © 2016 Edimax Technology Co. Ltd. All rights reserved.
www.edimax.com
Edimax Technology Co., Ltd
No. 278, Xinhu 1st Rd., Neihu Dist.,
Taipei City, Taiwan
Email: [e-mail]
Edimax Technology Europe B.V.
Fijenhof 2, 5652 AE Eindhoven,
The Netherlands
Email: [e-mail]
Edimax Computer Company
3350 Scott Blvd., Bldg.15, Santa Clara,
CA 95054, USA
Email : [e-mail]
SPECIFICATIONS
Outdoor Lightning Arrester
LT-610
FEATURES
•Protects your device from lightning strikes and electrical surges.
•Works with 2.4/5GHz devices for outdoor wireless applications.
•Features N-male (plug) to N-female (jack) connector type.
•Withstands up to 10KA current.
•Plug-and-Play easy installation with no configuration needed.
•Compact size and rugged housing.
Electrical Specifications
Type
Gas discharged
Frequency Range
0 ~ 6GHz
V.S.W.R
0 ~ 5GHz 1: 1.5
5 ~ 6GHz 1: 2.0
Gain Loss
0.5dB
Max. Withstand Current
10KA
DC Breakdown Voltage
90±20%(@100V/S)
Impulse Breakdown
Voltage
＜600V(@1KV/μs)
AC Discharge Current
5A(@50Hz）
Surge Discharge
Current
5KA(@8/20μs)
Insulation Resistance
≧1000mΩ
Electrode Capacitance
＜1.5P
Environmental & Mechanical Characteristics
Temperature
-20 ~ 70 °C
Humidity
95% RH @ 55 °C
Connector Type
N-male (male pin) to N-female (female pin)
Connector Body Material
Nickel-plated brass
Body Material
Anodized aluminum
Pin Material
Gold-plated brass
Dimensions (W x D x H)
22 x 68 x 25 mm
Weight
110g
Accessories
Mounting Brace
Wall-mount & pole-mount brace kit with
screws
Cable
Ground cable
APPLICATION DIAGRAM
The Edimax LT-610 Outdoor Lightning Arrester Kit provides
lightning protection for your wireless equipment. By adding a
simple arrester to your wireless antenna cabling, you can
reduce the costs of damaged access points, switches or other
network devices and protect your entire network from lighting
strikes and electrical surges.
Simply connect the Outdoor Lightning Arrester LT-610 directly
inline between your access point and your outdoor antenna
cable, and connect the ground wire to a ground pole.
ANT-2412D1 / ANT-2412D2
ANT-5815D1 / ANT-5815D2
Outdoor Antenna
LT-610
Outdoor Lightning Arrester
OAP1750
Outdoor Access Point
Connect to
Ground
N-male
Connector to
Antenna
N-female
Connector to
Access Point