IR-113E/IR-123E Quick Installation Guide 01-2013 / v1.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
PRODUCT INTRODUCTION Package Contents Before you start using this product, please check if there is anything missing from the package: 1 x Network camera 1 x Power adapter 1 x Sun shield 2 x Screw 1 x CD (with utility software, user manual & multi-language QIG) 1 x Quick installation guide 1 x Bracket Connection Types No. 1 2 3 4 5 6 7 8 9 10 11 Description Blue, sensor in 1, for alarm input, DV 3.3 volt level allowed Yellow, RS-485 DOrange, RS-485 D+ Black, GND Green, alarm out 1, DV 3.
Front No. 1 2 3 Description IR LEDs for illumination in night mode Day and night mode sensor for IR LED on/off control Fixed focal lens INSTALLATION 1. Before powering on the camera, find the screws in the package and use a screwdriver to fix the sun shield onto the device’s main body. 2. Secure the wall mount bracket onto the wall, and then secure the camera onto the bracket.
Note: The bracket is an optional accessory. 3. Connect the network camera to a router/switch in the network via the Ethernet port. 4. Connect the power adapter to the network camera’s power connector. 5. Plug the power adapter into a power outlet. 6. You should see the green LED on the RJ-45 port light up. If not, please recheck every step and try again, or contact your dealer for assistance. Note: The IR-113E/IR-123E (PoE model) supports the IEEE 802.3af PoE standard.
2. After the installation is complete, double-click the “EdiView_Finder” icon to execute the application.
3. Click “Discover” to search for all the network cameras on your local network (make sure all the network cameras are powered on and connected to the network first). 4. When you find a network camera, left click on it once and click “Link” to access it via the web browser. Note: You can also access the network camera’s management interface by entering the network camera’s IP address in the web browser’s URL bar (use Internet Explorer 7 and above for full functionality). 5. Log in the network camera.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: French: Czechian: Polish: Romanian: Russian: Magyar: Türkçe: Ukrainian: Slovakian: German: Spanish: Italian: Dutch: Portugese: Norwegian: Swedish: Danish: Finnish: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC. Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2004/108/EC.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European EMC directive (2004/108/EC). Equipment: Model No.: Report No.: 3Mpx Outdoor PoE True Day & Night Network Camera IR-113E T120302D06-E The following European standards for essential requirements have been followed: European Standard EN 55022:2006+A1: 2007, Class A CISPR 22: 2008 (Ed 6.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European EMC directive (2004/108/EC). Equipment: Model No.: Report No.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
14
