User manual

84
SMTP
Authentication
Select „Enable‟ if the SMTP server you‟re using requires
authentication, and input the username and password
below; If the SMTP server you‟re using does not require
authentication, select „Disable‟ here. If you‟re not sure,
ask your ISP or network administrator.
User Name
Type the user name of the user who has the mail
account. This setting is necessary when the SMTP server
which sends e-mails performs authentication.
Password
Type the password of the user who has the mail account.
This setting is necessary when the SMTP server which
sends e-mails performs authentication.
Reserved Space
Select the amount of SD card space which will be
reserved and will not be used from dropdown menu.
Click „Apply‟ to save settings and make the new settings take effect.
You can click „Send a test email‟ button to send a test E-Mail by the
configuration you set here.