User manual

ManualsBrandsEdimax ManualsComputer equipmentIC-7000PTn V3

Recording Time

Select the duration you wish this camera to record image

when a motion is detected from dropdown menu.

Available options are 1, 2, 3, 4, and 5 (seconds).

Sending File

Type

Select the file type that will be saved when a motion is

detected. Select „JPEG‟ and a still picture in JPEG format

will be saved; and select „AVI‟ to save a motion video clip.

Send snapshot

file to FTP

Select „Enable‟ to send the saved file to appointed FTP

server when a motion is detected, select‟ Disable‟ to

disable this function. You have to configure FTP server

parameters in „FTP Configuration‟ menu first, so this

function will take effect (see below).

Send snapshot

file to E-Mail

Select „Enable‟ to send the saved file to appointed E-mail

address when a motion is detected, select‟ Disable‟ to

disable this function. You have to configure mail server

parameters in „FTP Configuration‟ menu first, so this

function will take effect (see below).

SD Card Record

Select „Enable‟ to record detected motion to SD card (if

there‟s one), and select „Disable‟ to disable this function.

Storage File Type

Select saving file type for motion detection: JPEG (still

picture) or AVI MPEG4 / AVI H264 (for motion picture).

Record File Size

Input the maximum file size of saved file in Mbytes.

Maximum file size is 100.

Record to Folder

Select „Enable‟ to save file to a network folder which

supports SAMBA (also known as „Windows Network

Neighborhood‟), select „Disable‟ to disable this function.

Authentication

If username and password are not required to write files

in specified folder, select „Anonymous‟; if required, select

„Account‟.

User Name

Input user name required by destination network folder.

Password

Input password of the user name required by destination

network folder.

Samba Server

Input the IP address or host name of network file server.

Shared Folder

Input the folder name on file server.