User manual

45
2.2.3 Dynamic DNS
If your ISP does not give you a fixed Internet IP address (i.e. the Internet
address you’re using when you access the Internet is not always the same –
ask your ISP for detailed information), you can use this function to help you
locate the IP address of this Network Camera when you’re away from home or
office.
Before you can use this function, you’ll need to apply for an account at
dyndns.org/ no-ip.com (http://www.dyndns.org/
or http://www.no-ip.com ).
Detailed instructions of how to apply a new account can be found on
dyndns.org’s or no-ip.com website.
The descriptions of every setting in this menu will be given below:
Item Description
Enable DDNS Select ‘Enable’ to activate Dynamic DNS function of this
Network Camera, select ‘Disable’ to disable it.
Provider Select dynamic DNS service provider here. Dyndns.org
or no-ip.com is available currently.
Host Name Input dynamic DNS host name here.
User Name Input dynamic DNS user name here, must be the same
as the one you applied on dyndns.org or no-ip.com.
Password Input dynamic DNS password here, must be the same as
the one you applied on dyndns.org or no-ip.com.
Click ‘Apply’ to save settings and make the new settings take effect.