IC-3030 / IC-3030Wn / IC-3030PoE Quick Installation Guide 02-2012 / v2.
Copyright Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
PRODUCT INTRODUCTION Thank you for purchasing the Edimax IC-3030 series day & night network camera. With triple-mode (H.264, MPEG-4 & M-JPEG) video compression support, the Edimax IC-3030 series can ensure high video quality and high frame rate video streaming.
GETTING STARTED 1. Connect the network camera’s “LAN” port to a router or switch’s “LAN” port with an Ethernet cable, then power on the network camera. 2. If you have a wireless model (IC-3030Wn), connect the antennas to the antenna base.
3. Insert the Edimax CD into your CD-ROM and click “Setup Utility” to install the utility software. The setup wizard will guide you through the setup process. 4. After the installation is complete, the system will automatically run the administrator utility. Double-click IPCam Admin installer, and click “Next” when you’re prompted.
5. When the setup procedure finished, please click the icon indicated by white arrow to configure the camera or select the network camera you wish to access and then click the Internet Explorer icon to access the web interface. 6. Enter “admin” in the username field, and “1234” in the password field to log in.
. Once you are logged in, the browser will prompt you to install ActiveX. Click “Install ActiveX Control…” to continue. 8. You should now be able to see the video images captured by your new Edimax network camera. For advanced setting, please refer to the user manual included in the CD.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: French: Czechian: Polish: Romanian: Russian: Magyar: Türkçe: Ukrainian: Slovakian: German: Spanish: Italian: Dutch: Portugese: Norwegian: Swedish: Danish: Finnish: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, 2009/125/EC.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive (1995/5/EC). Equipment : Model No. : 1.3Mpx Wireless H.264 Network Camera IC-3030Wn Report No.
Declaration of Conformity We, Edimax Technology Co., LTD., declare under our sole responsibility, that the equipment described below complies with the requirements of the European EMC directive (2004/108/EC). Equipment : Model No. : 1.3Mpx H.264 Network Camera 1.3Mpx PoE H.264 Network Camera IC-3030 / IC-3030PoE Report No.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
14