User manual

26
1.8 Log Onto Web Management Interface
Make sure the IP camera is correctly powered (Power LED is on), and then
launch Internet Explorer and type the IP address of the IP camera in address
bar of Internet Explorer. You should be prompted to input the user name and
password:
Default user name is „admin‟ and password is „1234‟. Click „OK‟ to continue
after user name and password has entered.
If you are rejected, maybe the password has been modified previously. This
should not happen if this is a newly-purchased camera, however, if you get the
camera from someone else, the password would be changed. Please try to
obtain the correct user name / password, or you‟ll have to reset the camera.