User manual

5. In „IP address‟ field, please fill in any IP address begins with „192.168.2‟,

and ends with a value greater than 2 and less than 254 (You can use the

example in the picture „192.168.2.339‟). In Subnet mask field, please fill

„255.255.255.0‟. Please keep all other fields empty, and click „OK‟.

If you changed the IP address of this IP camera and you forget it, there are 2

methods to recover it:

a. Press and hold the „Reset‟ button located at the bottom of this IP

camera, to clear all settings of the IP camera and reset the IP address

back to 192.168.2.3. You‟ll lose all settings in the IP camera.

b. Ask network administrator to check the DHCP release table, if the

camera was set to obtain the IP address by DHCP, a new record will

be added to DHCP release table on DHCP server when the IP camera

is connected to the local area network.