` IC-7000 QIG Pan/Tilt IP Surveillance Camera IC-7000 Pan/Tilt IP Surveillance Camera Quick Installation Guide IC-7000 USER’S GUIDE PAGE 1/11 Rev. PV1.
` IC-7000 QIG Pan/Tilt IP Surveillance Camera Copyright© by Edimax Technology Co, LTD. all rights reserved.
` IC-7000 QIG Pan/Tilt IP Surveillance Camera HOLDERS HOLDERS1. OVERVIEW 1.1 PRODUCT DESCRIPTION IC-7000 is an effective and easy-to-use IP Camera for remote monitoring. The setup procedure required for this device is very simple. Built-in Web server allows you to use web browser (e.g., Microsoft IE) through LAN or internet in any time and any place. Type the IP address of the IP-CAM camera on the address bar of web browser to carry out the works of remote image monitoring and administration.
` IC-7000 QIG Pan/Tilt IP Surveillance Camera 1.3 SYSTEM REQUIREMENT PC Processor: Intel Pentium 4 ® 1.4GHz or above is recommended RAM: 256MB or more. Operation System: Windows 2000® or Windows XP® Hard Disk: More than 10MB or more available disk spaces. Network Network Interface: 10/100/1000 Ethernet interface.. Web Browser: Microsoft Internet Explorer 6.0 or above Internet connectivity. Active-X plug-in.of IE. 1.
` IC-7000 QIG Pan/Tilt IP Surveillance Camera Usage of Reset Switch: In case the system is working abnormally, press and hold Reset Switch for a short period of time (about 3 to 5 seconds) until Status LED is illuminated. The system will restart and the device will recover to the factory default settings. How to insert SD card: 1.5 PRODUCT SET-UP Anchor Frame Screw (P head M3.5X25) IC-7000 USER’S GUIDE PAGE 5/11 Rev. PV1.
` IC-7000 QIG Pan/Tilt IP Surveillance Camera 2. UTILITIES AND TOOLS 2.1 CAM_EZ SEARCH Insert the CD Disk into your CD-ROM drive. The Autorun.exe program should be executed automatically. If not, run Autorun.exe manually from “Autorun” folder in the CD. You can click the Setup Utility to configure WAN connection or click QIG , Manual to study . If your PC do not install Adobe Reader , you should click “Adobe Reader ” iconto install .
` IC-7000 QIG Pan/Tilt IP Surveillance Camera Version of CAM_EZ Search IP CAM List Display the way to get IP Renew List Version of IP CAM MAC address Choose the IP CAM Name way to get IP IPaddress PPPoE Account Subnet Mask Default Gateway Key in PPPoE Communication Port Audio UDP Renew executed to obtain an IP port figure 1 2.
` IC-7000 QIG Pan/Tilt IP Surveillance Camera section: z Usually, static IP address will be used to access Internet, so the IP address will vary. When you want to change IP address, please write down the original IP address on your computer first. Then you have to modify the IP address of your computer for testing if the IP-CAM can be operated normally or not. After finishing the test, IP address for your computer should be recovered to original settings.
` IC-7000 QIG Pan/Tilt IP Surveillance Camera Step 1. Click Update. You can see 255IC-7000. Step 2. Click 255IC-7000. You can see Name : IC-7000 IP : 192.168.2.3 SubMask :255.255.255.0 GateWay :192.168.2.254 HTTP Port :Http communication port. The default setting is 80. AudioPort: Port used for audio transmission, default setting is 1500. Step 3. Make sure the IP setting is STATIC. Figure 2 Step 4. Double click on 255IC-7000 to launch the browser.
` IC-7000 QIG Pan/Tilt IP Surveillance Camera z Open and execute CAM_EZ Search (as shown in Figure 3). The system will scan the IP-CAM that you just installed automatically. Then, you will find 255IC-7000 in the column of Camera Lists. Click 255IC-7000 with left mouse button. You can see the default settings for IP-CAM. Step 1. Click Update. You can see 255 IC-7000. Step 2. Click 255 IC-7000. You can see Name : IC-7000 IP : 192.168.2.3 SubMask :255.255.255.0 GateWay :192.168.2.
` IC-7000 QIG Pan/Tilt IP Surveillance Camera Example: After you finish the setting , you can view something by IC-7000 from internal . 1. Set up the IP CAM with static IP address. 2. Turn on your computer and launch IE browser. Type 211.78.174.94:( 1025、 1026、1039….) in the Address line. Now you can see the monitoring screen on web browser. IC-7000 USER’S GUIDE PAGE 11/11 Rev. PV1.