Instructions

221
Item
Description
Address Type
The address type of switch IP configuration including,
Static: Static IP configured by users will be used.
Dynamic: Enable the DHCP to obtain the IP address
from a DHCP server.
IP Address
Specify the switch static IP address on the static
configuration.
Subnet Mask
Specify the switch subnet mask on the static
configuration.
Default Gateway
Specify the default gateway on the static configuration.
The default gateway must be in the same subnet with
switch IP address configuration.
DNS Server 1
Specify the primary user-defined IPv4 DNS server
configuration.
DNS Server 2
Specify the secondary user-defined IPv4 DNS server
configuration.
SNMP Host Settings
Server Address
Enter the IP address of the SNMP Network Management
Server which will receive SNMP Traps from this device.
Version
The principal SNMP protocol versions including,
SNMPv1: This is the initial version of SNMP.
SNMPv2: This version uses a community-based form of
security, just like SNMPv1, replacing the Party-based
Administrative and Security Framework of SNMPv2.
SNMPv3: This is an interoperable standards-based
protocol defined in RFC2273, 2274, and 2275. It provides
secure access to devices by authenticating and
encrypting packets over the network. Due to the security
vulnerabilities of other versions of SNMP, it is
recommended to use SNMPv3.
Type
SNMP Agent devices translate information into a format
that can be interpreted by the SNMP manager. The
notifications are to the SNMP manager, and are called
Trap notifications or Inform requests.