Datasheet

2 www.edimax.com
Surveillance 24-Port Gigabit PoE+ Web Smart Switch
with 4-Port 10GbE SFP+ Uplinks
GS-5424PLX
Powerful 10GbE | 4 x 10GbE SFP+ Uplink
24 GbE ports for high-speed connections and up to
40Gbps of fiber-optic uplinking capability allowing the
GS-5424PLX to be easily deployed in multiple
physical locations, such as branches, retails, or
remote workgroup environment for larger network
access.
Guaranteed 200 Meters | Going the Distance
While general Ethernet switches have a distance
restriction of 100 meters, the GS-5424PLX long-range
mode provides extended power and data delivery
distance to 200 meters (656 ft.) at 10Mbps full-duplex
operation on a per-port basis. It's ideal for long-
distance applications such as IP cameras, VoIP
phones, access points, and PoE-enabled IoT devices
at remote locations.
ONVIF Compliant | For Quick Install of Security
Devices
The GS-5424PLX offers feature-rich IP Surveillance
VLAN to prioritize IP video traffic with ease, which
also supports ONVIF standardized network cameras
and network video recorders (NVRs). These functions
provide IP surveillance installers easy setup, quick
discovery, configuration, and control of ONVIF
conformant products on the network. Just plug and
play.
Cost-effective PoE Solution | PD Alive Check
Take advantage with a range of PoE functions that
lets the GS-5424PLX switch offer high-speed network
connection and power supply to Powered Devices
(PDs). It is an effective solution for network
environments where power outlets are difficult to
access. The installation is as easy as plugging in
cables, saving cost and time.
Moreover, the PoE Powered Device Alive Check
feature monitors real-time status of connected PDs by
ping action (sending alive-checking packets). If a PD
fails to respond, the GS-5424PLX PoE Switch will
reboot the PD, which enhances network reliability and
reduces administration workload.
Intelligent Thermal Control | Power Saving
Implementation
With a dedicated and intelligent microchip for system
cooling control, the GS-5424PLX can measure and
control fan speeds, also turn on/off each fan for power
saving and noise reduction.
Power Backfeed Protection | Let Safety be Known
The GS-5424PLX supplies up to 30W of electricity per
port and has a total power supply of 400W to power any
802.3at or 802.3af compliant PoE/PoE+ device. With
built-in PoE detection capability, the GS-5424PLX is
able to verify whether the connected device is 802.3at
or 802.3af compliant. Moreover, with the power
backfeed protection, the GS-5424PLX can avoid
damaging the PoE ports.
128 Gbps Backplane Bandwidth | Strong Ability to
Proceed Data
With 128Gbps backplane bandwidth, the GS-5424PLX
has a strong switching capability for sending data to the
destination devices at ultra-high speed. It supports a
forwarding rate of 95.2Mpps (64-byte package size),
utilizing the maximum available bandwidth without
delay.
Dual Firmware | Reduce Downtime
The dual firmware feature allows switches to have two
firmware stored. You can set up and implement an
active and a backup firmware. If the current firmware
faces problems, you can activate the backup firmware
right away to reduce downtime.
Completed Smart Tools | Intuitive and Powerful
The switch features smart and simple network
monitoring tools that allow for improved network
efficiency and security.
The web-based interface management features QoS
(Quality of Service) bandwidth control for better traffic
control, VLAN (Virtual LAN) for enhanced network
security and multicast IGMP snooping v1/v2/v3 for
streaming applications. For quick and easy setup, the
web-based management integrates advanced
management and security functions of Access Control
List (ACL), CoS, STP, IPv4/IPv6, Port Trunk, IGMP
v1/v2/v3 Snooping and Mirror.