User Manual

66
Figure 70 - Discovery > LLDP > Port Setting > Edit Port Setting
Item
Description
Port
Select specified port or all ports to configure LLDP state.
Mode
Select the transmission state of LLDP port interface.
 Disable: Disable the transmission of LLDP PDUs.
 RX Only: Receive LLDP PDUs only.
 TX Only: Transmit LLDP PDUs only.
 TX And RX: Transmit and receive LLDP PDUs both.
Optional
TLV
Select the LLDP optional TLVs to be carried (multiple selection is
allowed).
 System Name
 Port Description
 System Description
 System Capability
 802.3 MAC-PHY
 802.3 Link Aggregation
 802.3 Maximum Frame Size
 Management Address
 802.1 PVID.
802.1 VLAN
Name
Select the VLAN Name ID to be carried (multiple selection is
allowed).