User Manual

64
III-8-1-1. Property
To display LLDP Property Setting web page, click Discovery > LLDP > Property.
Figure 68 - Discovery > LLDP > Property
Item
Description
State
Enable/ Disable LLDP protocol on this switch.
LLDP Handling
Select LLDP PDU handling action to be filtered, bridging or flooded
when LLDP is globally disabled.
 Filtering: Deletes the packet.
 Bridging: (VLAN-aware flooding) Forwards the packet to all
VLAN members.
 Flooding: Forwards the packet to all ports
TLV Advertise
Interval
Select the interval at which frames are transmitted. The default is
30 seconds, and the valid range is 5–32767 seconds.
Holdtime
Multiplier
Select the multiplier on the transmit interval to assign to TTL
(range 2–10, default = 4).
Reinitialization
Delay
Select the delay before a re-initialization (range 1–10 seconds,
default = 2).
Transmit
Delay
Select the delay after an LLDP frame is sent (range 1–8191
seconds, default = 3).
Fast Start
Repeat Count
Select fast start repeat count when port link up (range 1–10,
default = 3).