User Manual

60
III-7-4. MST Port Setting
To configure and display MST port setting, click STP > MST Port Setting.
Figure 64 - Spanning Tree > MST Port Setting
Item
Description
MSTI
Specify the port setting on the specified MSTI.
Port
Specify the interface ID or the list of interface IDs.
Path Cost
The port path cost on the specified MSTI.
Priority
The port priority on the specified MSTI.
Port Role
The current port role on the specified port. The possible values are:
“Disabled”, “Master”, “Root”, “Designated”, “Alternative”, and
“Backup”.
Port State
The current port state on the specified port. The possible values
are: “Disabled”, “Discarding”, “Learning”, and “Forwarding”.
Mode
The operational STP mode on the specified port.
Type
The possible value for the port type are:
 Boundary: The port attaching an MST Bridge to a LAN that is
not in the same region.
 Internal: The port attaching an MST Bridge to a LAN that is not
in the same region.
Designated
Bridge
The bridge ID of the designated bridge.
Designated
Port ID
The designated port ID on the switch.
Designated
Cost
The path cost of the designated port on the switch.