User Manual

57
Figure 61 - Spanning Tree > Port Setting > Edit Port Setting
Item
Description
Port
Selected port ID.
State
Enable/Disable the STP on the specified port.
Path Cost
Specify the STP path cost on the specified port.
Priority
Specify the STP path cost on the specified port.
Edge Port
Specify the edge mode.
 Enable: Force to true state (as link to a host).
 Disable: Force to false state (as link to a bridge).
In the edge mode, the interface would be put into the Forwarding
state immediately upon link up. If the edge mode is enabled for
the interface and there are BPDUs received on the interface, the
loop might be occurred in the short time before the STP state
change.
BPDU Filter
The BPDU Filter configuration avoids receiving / transmitting
BPDU from the specified ports.
 Enable: Enable BPDU filter function.