User Manual

54
Figure 59 - Spanning Tree > Property
Item
Description
State
Enable/disable the STP on the switch.
Operation
Mode
Specify the STP operation mode.
 STP: Enable the Spanning Tree (STP) operation.
 RSTP: Enable the Rapid Spanning Tree (RSTP) operation.
 MSTP: Enable the Multiple Spanning Tree (MSTP) operation.
Path Cost
Specify the path cost method.
 Long: Specifies that the default port path costs are within the
range: 1-200,000,000.
 Short: Specifies that the default port path costs are within the