User Manual

37
Item
Description
Port list
Display the interface of port entry.
Status
Enable/Disable
Ping PD IP Address
Input IP address of the PD
Internal Time
The default setting about Interval (30 seconds) will
make switch detect the PD status by performing ping
requests every 30 seconds.
Retry Count
If there is no ping reply from the PD, retry count
starts to count from 1. Once retry count is reached to
2 times, the switch will perform the action in which
you defined.
Action
The Action including none, PD reboot, Reboot &
Alarm and Alarm
Reboot Time
Set the switch reboot time
III-5. VLAN
A virtual local area network, virtual LAN or VLAN, is a group of hosts with a common set
of requirements that communicate as if they were attached to the same broadcast
domain, regardless of their physical location. A VLAN has the same attributes as a
physical local area network (LAN), but it allows for end stations to be grouped togeth-er
even if they are not located on the same network switch. VLAN membership can be
configured through software instead of physically relocating devices or connections.
III-5-1. VLAN
Use the VLAN pages to configure settings of VLAN.
III-5-1-1. Create VLAN
This page allows user to add or delete VLAN ID entries and browser all VLAN entries that
add statically or dynamic learned by GVRP. Each VLAN entry has a unique name, user can
edit VLAN name in edit page.
To display Create VLAN page, click VLAN > VLAN > Create VLAN.