User Manual

199
Click “Edit” to view the Powered Device Monitor page.
Item
Description
Status
Enable/Disable
Ping PD IP Address
Input IP address of the PD
Interval Time
The default setting about Interval (30 seconds) will make
switch detect the PD status by performing ping requests
every 30 seconds.
Retry Count
If there is no ping reply from the PD, retry count starts to
count from 1. Once retry count is reached to 2 times, the
switch will perform the action in which you defined.
Action
The Action including none, PD reboot, Reboot & Alarm and
Alarm
Reboot Time
Set the reboot time from 30-180 seconds (default is 90
seconds)