User Manual

193
NOTE:
- Recurring (always occurs, with no defined stopping point).
For example, the United States started using recurring daylight savings rules
in 2007.
- Nonrecurring (defined for a specific period of time).
IV-4. Surveillance Settings
The Surveillance Settings page is used to configure the settings for the
Surveillance IP, SNMP host, log server and password.
Item
Description
SNTP State
Enable/Disable
Address Type
Choose Hostname or IPv4
Server Address
Enter the IP address of the SNTP server you would like to
synchronize with.
Server Port
Enter the server port (1-65535)
Daylight Saving Time
Type
Choose the daylight saving type in none, recurring,
non-recurring, USA or Europe
Offset
Enter the offset in minute (1-1440)
Operational Status
Current Time
It shows the current time for the switch.