User Manual

186
Item
Description
PoE port
Shows the PoE port is connected with IP camera, NVR or others
loopback
detection
Loopback Detection (LBD) provides protection against loops by
transmitting loop protocol packets out of ports on which loop
protection has been enabled. When the switch sends out a loop
protocol packet, and then receives the same packet, it shuts down
the port that received the packet.
Distance
It shows the cable length (in meters)
IV-1-3. IP Camera Info
The IP-Camera Information section provides information on each camera connected to
the switch.
Item
Description
The PoE consumption of the switch. This is listed as one negative integer
and one positive integer. The negative integer is the power being
consumed by the PoE devices connected to the switch. The positive integer
is the total PoE budget for the ports currently using PoE, based on the type
of PoE in use.
The total number of ONVIF IP-Cameras connected to the switch.