User Manual

173
III-14-4-4. User
To configure and display the SNMP users, click Management > SNMP > User.
Figure 168 - Management > SNMP > User
Item
Description
User
Specify the SNMP user name on the host that connects to the
SNMP agent. The max character is 30 characters. For the SNMP v1
or v2c, the user name must match the community name.
Group
Specify the SNMP group to which the SNMP user belongs.
Security Level
SNMP privilege mode
 No Security: Specify that no packet authentication is
performed.
 Authentication: Specify that no packet authentication
without encryption is performed.
 Authentication and Privacy: Specify that no packet
authentication with encryption is performed.
Authentication
Method
Authentication Protocol which is available when Privilege Mode is
Authentication or Authentication and Privacy.
 None: No authentication required.
 MD5: Specify the HMAC-MD5-96 authentication protocol.
 SHA: Specify the HMAC-SHA-96 authentication protocol
Privacy
Method
Encryption Protocol
 None: No privacy required.
 DES: DES algorithm