User Manual

10
Click “Edit” button on the table title to edit following system information.
Figure 13 - Status > System Information > Edit System Information
Item
Description
System Name
System name of the switch. This name will also use as CLI
prefix of each line. (“Switch>” or “Switch#”).
System Location
Location information of the switch.
System Contact
Contact information of the switch.
III-1-2. Logging Message
To view the logging messages stored on the RAM and Flash, click Status > Logging
Message.
Figure 14 - Status > Logging Message
Item
Description
Log ID
The log identifier.
Time
The time stamp for the logging message.
Severity
The severity for the logging message.
Description
The description of logging message.