User Manual

152
III-13-5. Copper Test
For copper length diagnostic, click Diagnostic > Copper Test.
Figure 145 - Diagnostics > Logging>Copper Test
Item
Description
Port
Specify the interface for the copper test.
Copper Test Result
Port
The interface for the copper test.
Result
The status of copper test. It include:
 OK: Correctly terminated pair.
 Short Cable: Shorted pair.
 Open Cable: Open pair, no link partner.
 Impedance Mismatch: Terminating impedance is not in the
reference range.
Length
Distance in meter from the port to the location on the cable
where the fault was discovered.