User Manual

147
III-13-1-2. Remote Server
To configure the remote logging server, click Diagnostic > Logging > Remote Server.
Figure 140 - Diagnostics > Logging > Remote Server
Item
Description
Server Address
The IP address of the remote logging server.
Server Ports
The port number of the remote logging server.
Facility
The facility of the logging messages. It can be one of the
following values: local0, local1, local2, local3, local4, local5,
local6, and local7.
Minimum
Severity
 Emergence: System is not usable.
 Alert: Immediate action is needed.
 Critical: System is in the critical condition.
 Error: System is in error condition
 Warning: System warning has occurred
 Notice: System is functioning properly, but a system notice
has occurred.
 Informational: Device information.
 Debug: Provides detailed information about an event.