User Manual

146
III-13-1. Logging
III-13-1-1. Property
To enable/disable the logging service, click Diagnostic > Logging > Property.
Figure 139 - Diagnostics > Logging > Property
Item
Description
State
Enable/Disable the global logging services. When the logging
service is enabled, logging configuration of each destination rule
can be individually configured. If the logging service is disabled, no
messages will be sent to these destinations.
Console Logging
State
Enable/Disable the console logging service
Minimum
Severity
The minimum severity for the console logging.
RAM Logging
State
Enable/Disable the RAM logging service.
Minimum
Severity
The minimum severity for the RAM logging.
Flash Logging
State
Enable/Disable the flash logging service.
Minimum
Severity
The minimum severity for the flash loggin.