User Manual

133
Destination
MAC
Select the type for Destination MAC address.
 Any: All destination addresses are acceptable.
 User Defined: Only a destination address or a range of
destination addresses which users define are acceptable.
Enter the destination MAC address and mask to which will
be matched.
Ethertype
Select the type for Ethernet frame type.
 Any: All Ethernet frame type is acceptable.
 User Defined: Only an Ethernet frame type which users
define is acceptable. Enter the Ethernet frame type value to
which will be matched.
VLAN
Select the type for VLAN ID.
 Any: All VLAN ID is acceptable.
 User Defined: Only a VLAN ID which users define is
acceptable. Enter the VLAN ID to which will be matched.
802.1p
Select the type for 802.1p value.
 Any: All 802.1p value is acceptable.
 User Defined: Only an 802.1p value or a range of 802.1p
value which users define is acceptable. Enter the 802.1p
value and mask to which will be matched.
III-11-3. IPv4 ACL
This page allow user to add or delete IPv4 ACL rule. A rule cannot be deleted if under
binding.
To display IPv4 ACL page, click ACL > IPv4 ACL.
Figure 127 - ACL > IPv4 ACL