User Manual

103
 Multiple Authentication: In this mode, every client need to
pass authenticate procedure individually.
 Multiple Hosts: In this mode, only one client need to be
authenticated and other clients will get the same access
accessibility. Web-auth cannot be enabled in this mode.
 Single Host: In this mode, only one host is allowed to be
authenticated. It is the same as Multi-auth mode with max
hosts number configure to be 1.
Order
Support following authentication type order combinations. Web
Authentication should always be the last type. The authentication
manager will go to next type if current type is not enabled or
authenticated fail.
 802.1x
 MAC-Based
 WEB-Based
 802.1x MAC-Based
 802.1x WEB-Based
 MAC-Based 802.1x
 WEB-Based 802.1x
 802.1x MAC-Based WEB-Based
 802.1x WEB-Based MAC-Based
Method
Support following authentication method order combinations.
These orders only available on MAC-Based authentication and
WEB-Based authentication. 802.1x only support Radius method.
 Local: Use DUT’s local database to do authentication
 Radius: Use remote RADIUS server to do authentication
 Local Radius
 Radius Local
Guest VLAN
Port guest VLAN enable state
 Enabled: Guest VLAN is enabled on port.
 Disabled: Guest VLAN is disabled on port.
VLAN Assign
Mode
Support following VLAN assign mode and only apply when source
is RADIUS
 Disable: Ignore the VLAN authorization result and keep
original VLAN of host.
 Reject: If get VLAN authorized information, just use it.
However, if there is no VLAN authorized information, reject
the host and make it unauthorized.
 Static: If get VLAN authorized information, just use it. If there
is no VLAN authorized information, keep original VLAN of
host.