User Manual

102
Item
Description
Authentication
Type
Set checkbox to enable/disable following authentication types
 802.1x: Use IEEE 802.1x to do authentication
 MAC-Based: Use MAC address to do authentication
 WEB-Based: Prompt authentication web page for user to do
authentication
Guest VLAN
Set checkbox to enable/disable guest VLAN, if guest VLAN is
enabled, you need to select one available VLAN ID to be guest
VID.
MAC-Based
User
ID Format
Select mac-based authentication RADIUS username/password ID
format.
 XXXXXXXXXXXX
 Xxxxxxxxxxxx
 XX:XX:XX:XX:XX:XX
 xx:xx:xx:xx:xx:xx
 XX-XX-XX-XX-XX-XX
 xx-xx-xx-xx-xx-xx
 XX.XX.XX.XX.XX.XX
 xx.xx.xx.xx.xx.xx
 XXXX:XXXX:XXXX
 xxxx:xxxx:xxxx
 XXXX-XXXX-XXXX
 XXXX-XXXX-XXXX
 XXXX.XXXX.XXXX
 XXXX.XXXX.XXXX
 XXXXXX:XXXXXX
 XXXXXX:XXXXXX
 XXXXXX-XXXXXX
 XXXXXX-XXXXXX
Port Mode Table
Port
Port Name.
Authentication
Type
(802.1X)
802.1X authentication type state
 Enabled: 802.1X is enabled.
 Disabled: 802.1X is disabled.
Authentication
Type
(MAC-Based)
MAC-Based authentication type state
 Enabled: MAC-Based authentication is enabled
 Disabled: MAC-Based authentication is disabled
Authentication
Type
(WEB-Based)
WEB-Based authentication type state
 Enabled: WEB-Based authentication is enabled
 Disabled: WEB-Based authentication is disabled
Host Mode
Authenticating host mode