GS-1016 V2 & GS-1026 V3 Quick Installation Guide 11-2020 / v1.
Contents I. Product Information...........................................1 I-1. Package Contents ..................................................................... 2 I-2. Hardware Overview.................................................................. 3 I-3. LED Status................................................................................. 5 II. Hardware Installation ........................................
I. Product Information The GS-1016 V2 and GS-1026 V3 Gigabit switch are designed to upgrade or expand the network with high-speed, enhanced performance while maintaining a compact form factor. The GS-1016 V2 and GS-1026 V3 are designed with fanless, rack-mounted and metal case and offer an easy plug-and-play, flexible-deployment, cost-effective, energy efficient solution for users looking to extend networks and fulfill their high bandwidth data transfer and streaming needs.
I-1.
I-2. Hardware Overview GS-1016 V2: 16-Port Gigabit Rack-mount Switch 1 2 3 No.
GS-1026 V3: 26-Port Gigabit with 2 SFP Slots Rack-mount Switch 1 2 3 4 No.
I-3.
II. Hardware Installation This section will guide you through the steps to set up the GS-1016 V2 and GS-1026 V3. 1. Connect the power supply to the PoE switch. NOTE: Ensure the “PWR” LED lights on Green. 2. Plug an Ethernet cable from the LAN port to the router. NOTE: Ensure the “LAN” LED lights on Green or Amber. 3. Plug an Ethernet cable from the LAN port to any devices that have Ethernet port.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/30/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/30/EU. Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami określonymi Dyrektywą UE 2014/30/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: 16-Port Gigabit switch Model No.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: 24-Port Gigabit switch with 2 SFP Slots Model No.
