Datasheet

www.edimax.com
Long Range 8-Port Gigabit Switch with 4 PoE+ Ports & DIP Switch
GS-1008PHE V2
PoE
Distance
200M
802.3at
30W
802.3af
15.4W
Long Range 8-Port Gigabit Switch with 4 PoE+ Ports & DIP Switch
1
100M/
1000M
Fan-
Less
VLAN
QoS
*IP Phone: 3- 7W, IP Camera: 7- 10W PZT Camera: 15 -25+ W
*Access Point: 8W for 802.11a/g radios; upwards of 20W for 802.11n radios
The guidelines are meant to provide general estimates for power consumption. Actual power requirements vary and should
be confirmed for each model when determining your PoE budget requirements.
1
Introduction
The Edimax GS-1008PHE V2 is a Long Range 8-Port Gigabit Switch with 4 PoE+ Ports designed for use in home,
small or medium sized network environments. With four DIP switches, PoE ports can be manually set with
on/off control, extending PoE delivery distance up to 200 meters and port-based on/off control for VLAN and
QoS is also supported. The switch easily connects and supplies power to PoE-enabled devices such as wireless
access points, network cameras and IP phones as well as other Ethernet-enabled devices such as computers,
printers or network attached storage (NAS). The compact size and fan-less design make the switch an ideal
solution for expanding home and small business networks.
Power over Ethernet (PoE+) Auto Detection
Features four IEEE 802.3at Power over Ethernet
(PoE+) ports which supply up to 30 watts of
electricity per port. It can convert standard
100‐240V AC power into low‐voltage 50 - 57V DC
electricity to power IEEE 802.3at compliant network
accessories via existing LAN cables. With PoE
detection capability, the GS-1008PHE V2 is able to
verify whether the connected device is IEEE 802.3at
compliant. In the event that a PoE device is not
detected, only network data will be transmitted
through the LAN cable – meaning easy setup and
management of network devices such as access
points and network cameras.