Datasheet

www.edimax.com
8-Port Gigabit PoE+ Switch with DIP Switch
GS-1008P V2
Power and Data Transmit Distance Extension
The built-in solid DIP switch provides “Extend” operation modes on switch 1 & 2. The GS-1008P V2 operates as
a “Standard” IEEE 802.at/af PoE Switch when DIP switches status off. In the “Extend” mode, status on, the GS-
1008P V2 operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output
over a distance of up to 200 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new
feature, the GS-1008P V2 provides an additional solution for 802.3at/af PoE distance extension, thus saving the
cost of Ethernet cable installation.
2
Innovative Port-based VLAN features
The ES-1008P V2 features port-based VLAN where ports
can be isolated from each other via DIP switch port 3 & 8.
This can help to prevent IP camera’s multicast or
broadcast storms from affecting each other.
Hardware QoS for Video & Voice Traffic Priority
Supports 802.1p QoS via DIP switch port 4. This ensures first
priority for video and voice traffic.
DIP Switch Status
Description
1
On PoE Ports 1 – 2 Power + Data extend
PoE Extend Off As a normal PoE switch
2
On PoE Ports 3 – 4 Power + Data extend
PoE Extend Off As a normal PoE switch
3
On Ports 1 – 4 VLAN enabled
VLAN
Off Ports 1 – 4 VLAN disabled
4
On QoS (Video & Voice Traffic High Priority) enabled
QoS
Off QoS disabled
5
On PoE Ports 5 Power + Data extend
PoE Extend Off As a normal PoE switch
6
On PoE Ports 6 Power + Data extend
PoE Extend Off As a normal PoE switch
7
On PoE Ports 7 Power + Data extend
PoE Extend Off As a normal PoE switch
8
On Ports 5 – 7 VLAN enabled
VLAN Off Ports 5 – 7 VLAN disabled