Datasheet

ManualsBrandsEDIMAX ManualsNetwork Routers & SwitchesNetwork RJ45 switch 8 ports 10 Mbit/s

Table Of Contents

www.edimax.com

8-Port Gigabit PoE + Switch with DIP Switch

GS-1008P V2

PoE

Distance

200M

802.3at

30W

802.3af

15.4W

8-Port Gigabit PoE+ Switch with DIP Switch

100M/

1000M

Fan-

Less

VLAN

QoS

Introduction

The Edimax GS-1008P V2 is a Eight PoE+ Port Gigabit switch designed for use in home, small or medium sized

network environments. With 8 DIP switches, the PoE port can be manually set for ON-OFF control to extend

the PoE delivery distance up to 200 meters and also support port-based NO-OFF for VLAN and QoS functions. It

easily connects and supplies power to PoE-enabled devices such as wireless access points, network cameras

and IP phones as well as other Ethernet-enabled devices such as computers, printers and network attached

storage (NAS). The device's compact size and fan-less design make it an ideal solution for expanding home and

small business networks.

Power over Ethernet (PoE+) Auto Detection

The GS-1008P V2 features four IEEE 802.3at Power over

Ethernet (PoE+) ports which supply up to 30 watts of

electricity per port. It can convert standard 100-240V AC

power into low-voltage 50 - 57V DC electricity to power

IEEE 802.3at compliant network accessories via existing

LAN cables. With PoE detection capability, the GS-1008P

V2 is able to verify whether the connected device is IEEE

802.3at compliant. In the event that a PoE device is not

detected, only network data will be transmitted through

the LAN cable – meaning easy setup and management of

network devices such as access points and network

cameras.

*IP Phone: 3- 7W, IP Camera: 7- 10W PZT Camera: 15 -25+ W

*Access Point: 8W for 802.11a/g radios; upwards of 20W for 802.11n radios

The guidelines are meant to provide general estimates for power consumption. Actual power requirements vary and should

be confirmed for each model when determining your PoE budget requirements.

Summary of content (4 pages)

PAGE 1
8-Port Gigabit PoE + Switch with DIP Switch GS-1008P V2 802.3af 802.3at 15.4W 30W 100M/ 1000M PoE Distance 200M FanLess VLAN QoS 8-Port Gigabit PoE+ Switch with DIP Switch Introduction The Edimax GS-1008P V2 is a Eight PoE+ Port Gigabit switch designed for use in home, small or medium sized network environments.
PAGE 2
8-Port Gigabit PoE+ Switch with DIP Switch GS-1008P V2 Power and Data Transmit Distance Extension The built-in solid DIP switch provides “Extend” operation modes on switch 1 & 2. The GS-1008P V2 operates as a “Standard” IEEE 802.at/af PoE Switch when DIP switches status off. In the “Extend” mode, status on, the GS1008P V2 operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 200 meters overcoming the 100m limit on Ethernet UTP cable.
PAGE 3
8-Port Gigabit PoE+ Switch with DIP Switch GS-1008P V2 CCTV Mode The unique CCTV-mode DIP switch function is ideal for surveillance networking environment. Switching all DIP switches to on enables CCTV mode which gives multi-function PoE + data extension, Port Isolation and QoS on the ES-1008P V2. When using video surveillance systems for homes, business or institutions, the CCTV mode provides better speeds for multicast viewing and easier installation.
PAGE 4
8-Port Gigabit PoE+ Switch with DIP Switch GS-1008P V2 HARDWARE INTERFACE SPECIFICATIONS GS-1008P V2 8-Port Gigabit PoE+ Switch with DIP Switch Hardware Ports Transmission Method LED Indicators Fan DIP Switch Power Requirements Power Consumption Dimensions (L x W x H) Weight Performance Switching Capacity MAC Address Buffer Memory Jumbo Frames Filtering/Forwarding Rates Power over Ethernet Standard Power Output Pin Assignment PoE Power Budget Environment Temperature Humidity (Non-condensing) Standards Co