GS-1005BE Quick Installation Guide 03-2021 / v1.
Contents I. Product Information ..................................................1 I-1. Package Contents ............................................................................... 2 I-2. Hardware Overview ........................................................................... 2 I-3. LED Status .......................................................................................... 3 II. Hardware Installation ..............................................
I. Product Information The Edimax GS-1005BE equipped with five 2.5 Gigabit Ethernet ports is easy to setup and with no configuration or no Software needed. Additionally, if your network has a mix of legacy and modern computing capabilities, each port allows for 100Mbps standard Ethernet, 1000 Mbps Fast Ethernet, or 2.5G Gigabit Ethernet connections.
I-1. Package Contents Before start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): Quick Installation Guide GS-1005BE I-2. Power Adapter (12V) Hardware Overview 1 2 1 No.
I-3. LED Status Function Color LINK/ACT Green/Amber PWR Green Status Description On Port is connected Off Port is disconnected or link failure Flashing Sending or receiving data. On Power on Off Power off Note: LNK/ACT, - Green= Link at 2.5G - Amber= Link at 100/1000M II. Hardware Installation This section will guide you through the steps to set up the GS-1005BE. 1. Plug power adapter into a wall outlet. NOTE: Ensure the “PWR” LED lights on Green. 2.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/30/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/30/EU. Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami określonymi Dyrektywą UE 2014/30/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: 2.5GbE 5-Port Gigabit Switch Model No.
