Datasheet

ManualsBrandsEdimax ManualsComputers & AccessoriesIEEE 802.3bt Gigabit 60W PoE++ Injector

1 www.edimax.com

IEEE 802.3af/at/bt Power over Ethernet Standard

Because of adding the capability of IEEE 802.3af/at/bt Power over Ethernet (PoE) to a non-PoE Ethernet switch or

router, the GP102IT can directly be connected to any IEEE 802.3af/at/bt end-nodes such as PTZ (Pan, Tilt & Zoom)

/speed dome IP cameras, color touch-screen Voice over IP (VoIP) telephones, multi-channel wireless LAN access

points, digital signage, information kiosk, POS system, and thin client where the IEEE 802.3af/at/bt in-line PoE port is

supported.

Higher Cost Efficiency and Easy Installation

The Power over Ethernet technology enables the Ethernet wire to carry both data and power. Thus, the GP-102IT

reduces the need for cable installation and eliminates the need for extension cords, electrical wall outlets, ceiling or any

remote, unreachable place for the PoE enabled devices with easy plug-and play installation. All In all, it lowers the

installation costs and simplifies the deployment effort.

Flexible & Reliable Power Supply

Offering the optional solution for PoE enable devises, the GP-102IT is the perfect addition to existing non-PoE network

infrastructures or retrofit projects. Featuring PoE short circuit protection and over circuit protection to safeguard network

devices and protect against damage. Supplying the PoE power of up to 60 watts through the four pairs of standard Cat.

5e/Cat. 6 Ethernet cabling.

OVERVIEW

The Edimax GP-102IT is a Power over Ethernet

(PoE) injector that not only delivers a cost-effective

solution for power distribution, but also provides a

seamless way of deployment on the existing LAN

infrastructure. With the use of power injectors, DC

power of up to 60W based on the IEEE 802.3bt

standard and the data that comes from a non-PoE

switch or router are merged together and then

transmitted to the remote IEEE 802.3af/at/bt compliant

products located without power outlet through the

Ethernet cabling. Hence, the easy plug-and-play GP-

102IT Gigabit PoE++ injector preserves your

investment in hardware upgrade without the need for

spending on extra PoE switches and deploying power

cables.

IEEE 802.3bt Gigabit 60W PoE++ Injector

GP-102IT

FEATURES

• Complies with IEEE 802.3af, IEEE 802.3at and IEEE

802.3bt Power over Ethernet (PoE) Standards.

• Adds PoE capability to a non-PoE Ethernet switch or

router.

• Gigabit LAN ports provide high-speed connectivity.

• Supports PoE Powered Device (PD) up to 60W.

• PoE short circuit protection to safeguard network

devices.

• Delivers power and data to PoE device from up to

100 meters (328 feet) over a single Ethernet cable.

• Reduces installation and equipment costs.

• Easy plug-and-play desktop or wall-mounted

installation.

Summary of content (3 pages)

PAGE 1
IEEE 802.3bt Gigabit 60W PoE++ Injector GP-102IT FEATURES • Complies with IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt Power over Ethernet (PoE) Standards. • Adds PoE capability to a non-PoE Ethernet switch or router. • Gigabit LAN ports provide high-speed connectivity. • Supports PoE Powered Device (PD) up to 60W. • PoE short circuit protection to safeguard network devices. • Delivers power and data to PoE device from up to 100 meters (328 feet) over a single Ethernet cable.
PAGE 2
IEEE 802.3bt Gigabit 60W PoE++ Injector GP-102IT PoE Standards and Powered Devices (PDs) Supported The GP-102IT Gigabit PoE++ injector complies with IEEE 802.3bt (PoE++), IEEE 802.3at (PoE+) and IEEE 802.3af (PoE) Standards and supports various PoE devices (PDs) up to 60W. PoE Up to 15.4W 802.3af Up to 30W PoE+ 802.3at PoE++ 802.3bt 802.11n Biometric Access Point Access Control 802.11n High Power AP Up to 60W 802.11ac/ax Access Point IP Phone IEEE802.
PAGE 3
IEEE 802.3bt Gigabit 60W PoE++ Injector GP-102IT SPECIFICATIONS HARDWARE Ports LED Indicators • 1 x RJ-45 10/100/1000Base-T Input Port • 1 x RJ-45 10/100/1000Base-T PoE Output Port AC Power (PWR) PoE Power 100-240V AC, 50-60Hz, 1.5A Desktop/Wall Metal Fanless 73(W) x 154(D) x 36(H) mm 568g Power Input Mounting Housing Fan Dimensions Weight POWER OVER ETHERNET Standard IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt Power Output DC 54V/1.67A, up to 60W 1/2,3/6 for IEEE802.