GP-101IT Quick Installation Guide 03-2021 / v1.
I. Product Information I-1. Package Contents GP-101IT PoE Injector I-2. Hardware Overview I-3. LED Status QIG Power Cord Code Name 1 2 A Indication / Function On: PD (Powered Device) connected PORT LED Off: No PD connected On: Power on AC LED Off: Power off Data & power: Connect to a PoE PD (Powered DATA/POWER port Device such as PoE wireless access point) B DATA port C Power Socket Data only: supports 10/100/1000 base Ethernet.
I-4. Connections Connect the injector as shown below: The PoE/DATA port sends power and Ethernet data to your PoE-enabled device. Use a CAT 5 cable to connect the PoE/Data port to your PoE-enabled device. The DATA port doesn’t deliver power. Use an Ethernet cable to connect to the injector’s Data port to the LAN of an Ethernet device, such as an Ethernet switch. Use the included power cord to connect the injector’s power socket to a power source.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/30/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/30/EU. Polski: Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami określonymi Dyrektywą UE 2014/30/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: Gigabit PoE Injector Model No.
