EW-7822ULC / UTC Quick Installation Guide 08-2021 / v1.
I. Product Information I-1. Package Contents EW-7822ULC or EW-7822UTC QIG CD I-2. LED Status LED WLAN LED Status On Off Description Wireless activity: transmitting or receiving data. No wireless activity. I-3. System Requirements - Windows 7/8/8.1~, Mac OS X 10.7~, Linux USB 2.
I-4. Safety In order to ensure the safe operation of the device and its users, please read and act in accordance with the following safety instructions. 1. The wireless adapter is designed for indoor use only; do not place the wireless adapter outdoors. 2. Do not place the wireless adapter in or near hot/humid places, such as a kitchen or bathroom. 3. The wireless adapter contains small parts which are a danger to small children under 3 years old.
II. Installation 1. Switch on your computer and insert the USB adapter into an available USB port of your computer. Never use force to insert the USB adapter. 2. Insert the included CD-ROM into the CD drive of your computer. The setup wizard is also available for download from the Edimax website. 3. For Windows users the setup wizard will open. For Mac users the CD’s “Mac” folder will open.
III. Windows III-1. Driver Installation If the CD didn’t auto-run, please open the “Autorun.exe” file to start the setup wizard. 1. Click the wireless USB adapter to continue. 2. Click “Install Driver” to continue.
3. Click “Next” to continue. 4. Please wait while the driver is installing.
5. You need to restart your computer before using the wireless adapter. Choose whether to restart your computer now or later, and click “Finish”. 6.Click “Exit” to close the setup wizard. The multi-language QIG is also included on the CD-ROM. To open it click “Multi-language QIG”. 7. Please disable any other wireless adapters as described in V. Disabling Network Adapters. Then, Windows users can connect to an available Wi-Fi network as usual. For guidance on doing so, please refer to VI.
III-2. Driver Uninstallation To uninstall drivers for your adapter, use the Windows Control Panel built-in Programs and Features, Uninstall a Program or Add or Remove Programs feature. An example is shown below: III-2-1. Windows 7, 8.1 & 10 1. Open Control Panel using the Start menu or Search function. 2. Select Uninstall a program under the Programs category. 3. Select Edimax AC1200 (or similar) and click Uninstall.
IV. Mac OS IV-1. 1. 2. 3. Driver Installation Open the “RTLWLANU_MacOS..” (or similar) folder and double click the “Installer.pkg” file to open the driver installation wizard. Click “Continue” to proceed to the next step. The next screen displays important information, please read it carefully. Click “Continue” when you are ready to continue.
4. Select a language (the default language is English) and click “Continue” to install the driver. 5. To read the software license click “Read License” and then click “Agree” to confirm you agree to the terms. You must agree to the terms to continue installing the software.
6. 7. If prompted, select which user to install the software for and click “Continue”. Click “Install” to install the driver.
8. You may be prompted to enter your system/administrative password before the installation can begin. Enter your password and click “Install Software”. 9. You will be prompted that you must restart your computer when the installation is complete. Click “Continue Installation” to proceed.
10. Please wait while the driver is installing. 11. When the installation is complete, you will see the following screen informing you that “The installation was successful”. Click “Restart” to restart your computer. 12. Next, please disable any other wireless adapters as described in V. Disabling Network Adapters. Then you can connect to a Wi-Fi network as described in VI. Using The Adapter.
IV-2. Driver Uninstallation 1. Open the “RTLWLANU_MacOS..” (or similar) folder. 2. Double click the “Uninstall.pkg” file and follow the on-screen instructions. V. Disabling Network Adapters To ensure that your USB wireless adapter can function correctly, it is recommended that you disable any other existing wireless network adapters installed on your computer. If you are unsure how to do so, you can refer to the user manual for your computer, or follow the guidance below. VI.
2. Search for the SSID of your Wi-Fi network and then click “Connect”. If you set a password for your network, you will then be prompted to enter it. 3. After correctly entering your password, you will be successfully connected to your Wi-Fi network.
WPS (Wi-Fi Protected Setup) is a simple, alternative way to establish connections between WPS compatible devices. Most modern wireless network devices feature a built-in WPS button, which activates WPS on that device. When WPS is activated in the correct manner and at the correct time for two compatible devices, they will automatically connect to each other.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: AC1200 Wi-Fi Dual-Band USB Adapter Model No.: EW-7822ULC/EW-7822UTC The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : EN 300 328 V2.2.2 (2019-07) EN 301 893 V2.1.1 (2017-05) EMC : EN 301 489-1 V2.2.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the United Kingdom Radio Equipment directives. Equipment: 11ac Wireless Dual-Band Selectable USB Adapter Model No.: EW-7822ULC The following European standards for essential requirements have been followed: Radio Equipment Regulations 2017 (S.I. 2017/1206) Spectrum : EN 300 328 V2.2.2 (2019-07) EN 301 893 V2.1.
